Every time we return to Sanitas after hurricane season I say, THIS time will be different. THIS time, we prepared so well, and maintained Sanitas so well, that we’ll be back on the high seas and cruising in tropical paradise in no time. And each year, I’m wrong.
This year, we booked an apartment for two weeks, while working in the boatyard. It’s so, so nice to have a shower and air conditioning at the end of a hot and dirty day. I’ll save you the details, but we worked our butts off and got tons of work done, including painting the bottom with that super, super expensive red anti-foul paint. I even took a couple of days off to celebrate my birthday. We had a smooth splash, and headed over to Woburn Bay ready to jump right back into cruising life. We needed to wait for a sea freight shipment of boat parts we’d ordered to arrive from the States, but as soon as it arrived and cleared customs, we’d be good to go. And then, it all went pear shaped.
On a mooring ball, or at anchor, we rely on our dinghy to get from the boat to shore for shopping, socializing, and basically everything. So, of course, the first time we tried to dinghy ashore in Bug, the outboard motor didn’t start. Welcome to boat life! One day into our season of freedom, and we might as well hav been in quarantine. Ever resourceful, Capt. Mike hacked into a nearby marina’s wifi, watched a few YouTube videos on tuning the carburetor, poured in half a bottle of Sea Foam, and in less that two days he had Bug up and running again. And we’re off to a good start.
Next, we took advantage of the clean water far back in Woburn Bay (NOT near the stinky runoff from the Clark’s Court Distillery!) to run our desalinating water maker. First test came in at 400 ppm of total dissolved solids…then 600…then 800…then 1200. We can’t drink that! Dagnabit! We had been gambling that the three rebuilds we performed on the watermaker last year would do the trick to keep us going at least one more year but alas, it was not to be. So back to that free wifi to shop for a replacement. We found the best price, placed an order to have it shipped from the US, and then got an email stating it was back ordered and wouldn’t ship for 6-8 weeks. To add insult to injury, Mike’s Visa card was compromised in the transaction, and Visa canceled the brand new card. Back to square one. Eventually, we found our watermaker model in stock (NOT at the lowest price), placed another order, and began the wait for a shipment from the US all over again.
I’ve lamented the cost and complexity of marine insurance in the past. Well, we’ve had the same Jackline policy through Markel Insurance for four years now, and this year they required a professional survey on Sanitas before renewal. This is similar to hiring a home inspector before you buy a house – an independent third party inspects the entire boat for any potential safety or maintenance issues and documents all of the findings. On our dime, of course. Sanitas came through the survey with flying colors, and we only had to make minor corrections, such as replacing outdated flares to address the findings. We thought we were in good shape there until, one day after we splashed and we’re back on the water, our insurance agent sent us an email stating they now require an aloft rigging inspection as well. What the deuce? We just went through the whole survey rigmarole using the old guidance, which did not require a rigging inspection. The good news, we were able to find a company that would inspect in the water, so we didn’t have to pay for another haul out. The bad news, they found a small flaw in the wire cable of our backstay, and we had to replace it. By now our dreams of a quick departure from Grenada without spending a fortune were shattered.
I told Capt Mike, “Don’t look for any more problems! I don’t want to find anything!” And he responded, “Remember what BOAT stands for – Bring On Another Thousand” I don’t find that joke so funny any more
3 thoughts on “A series of unfortunate events – boat work edition”
So what is the gear you are holding in your hand for? is that what broke on the dingy?
Wondering have you been able to budget for each season’s boat maintenance or is it a surprise every year?
It seems surprising you don’t have even more mechanicals while cruising given how severe the environment clearly is. Congrats on getting through another prep!
Yes, I should have included a caption for that photo. It’s actually part of our normal maintenance routine to replace the impeller for the cooling system of our Yanmar motor every year. This year we found that at least one fin was missing, so we’re glad we replaced it before it failed! Another sailing friend couldn’t start their motor when they first splashed this year because their impeller failed.
We budget 10% of the value of our boat each year for maintenance. We might exceed that this year with the watermaker replacement. It’s also one reason why we don’t have a bigger boat. More hull to paint, bigger sails, taller rigging – everything is more expensive to maintain on a bigger boat.
Thanks for the additional notes Jen! Yeah that gear would not last very long without a fin. Its interesting to see all the gizmos that you deal with, I’m sure Mike is feeling handy these days.
I had no idea what the boat maintenance was, but it makes sense that its a percentage of the cost/ size. That’s a healthy budget. It would probably be double or triple that I imagine if you had someone do all the work you do.
Take care and thanks for the updates!